Spektrum SPMMSJR720 - Manual (Page 4)

Spektrum Air Module 6 Spektrum Air Module 7
Preparing the Transmitter
1. With the transmitter’s power turned off, unscrew and remove the transmitter’s
antenna.
Installation
3. Place the transmitter in PPM modulation mode. This is done in the
modulation menu in your transmitter’s programming. Refer to the instructions
included with your transmitter if you need assistance.
Installing the Futaba Standard and Futaba MZ Modules
1. Depending on the type of module that you purchased (Futaba standard,
Futaba MZ), more than one antenna adapter may be included with your
module system. Choose the antenna adapter that fits your radio and screw it
in place until the flange contacts the top of the antenna hole.
Installation
2. Remove the 72MHz module from the back of the transmitter.