Spektrum SPM20220 DX2.0 User Manual

Page 9

Model Select

(System Mode)

The DX2.0 has memory for two models. This feature allows for two different models to be

operated with the same transmitter (additional receivers and servos must be purchased

separately) or one model with two different race setups.

Accessing the model Select Function

1. Press the

SCROLL and CHANNEL keys at the same time and hold.

2. Turn the transmitter power switch on to enter System Mode.
3. If MDL does not appear on the screen, press the SCROLL key until MDL appears.
4. Press the

INCREASE or DECREASE key to select the desired model number

(1 or 2).

5. Press the

SCROLL key to access the Model Name Entry Function.

6. To exit the System Mode, either turn the transmitter power switch off or press the

SCROLL and CHANNEL keys at the same time.

MDL

Model Select Function

- -

Model Number

The DX2.0 allows a three-character name to be input for each of the two (2) models available.

The current model, with name, will then be displayed in the Normal display screen. This

feature is useful to help identify different models, setups, etc. For information on selecting

models 1 or 2, please refer to the Model Select Function (page 16).

Accessing the model Name Entry Function

To access the Model Name Entry function, follow the steps below:

1. Press the

SCROLL and CHANNEL keys at the same time and hold.

2. Turn on the transmitter power switch to enter the System Mode.
3. Press the

SCROLL key until MD1 appears on the screen with the first character

flashing.

4. Press the

INCREASE or DECREASE key to select the correct letter/number for the first

character (flashing).

5. To change the remaining two characters, press the

CHANNEL key until the desired

character to be changed is flashing.

6. Press the

SCROLL key to access the Grip Button C function.

7. To exit the System Mode, either turn the transmitter power switch off or press the

SCROLL and CHANNEL keys at the same time.

The Grip Button C function of the DX2.0 allows you to activate the Emergency Steering

function. This function allows you to override the steering dual rate giving maximum travel,

which is useful in oval racing. Use the information below to select the correct Grip Button C

assignment for your particular installation.

Accessing the model Name Entry Function

1. Press the

SCROLL and CHANNEL keys at the same time and hold.

2. Turn on the transmitter power switch to enter the System Mode.
3. Press the

SCROLL key until GBC appears on the screen.

4. Press the

INCREASE or DECREASE key to select the correct Grip Button C function

type to be used.

5. Press the

SCROLL key to access the Data Reset function.

6. To exit the System Mode, either turn the transmitter power switch off or press the

SCROLL and CHANNEL keys at the same time.

Model Name

Entry

(System Mode)

MDI

- -

Grip Button C

Function

Select

(System Mode)

Flashing character indicates
the character to be adjusted

Current Model Number

GBC

Grip Button C is inhibited

Grip Button C Function

GBC

Emergency Steering Button
is activated