Spektrum SPM18000 DX18 w/AR9020 TX/RX ONLY MD2 - Manual (Page 13)

13 SPEKTRUM DX18 • TRANSMITTER INSTRUCTION MANUAL
EN
COMMON SYSTEM SETUP FUNCTIONS
Model Select
Model Select enables you to access any of the 50 internal model
memory locations in the Model Select list.
1. Scroll to the desired model memory in the Model Select list.
2. When the desired model memory is highlighted, press
the scroll wheel once to select the model. The transmitter
returns to the System Setup List.
Direct Model Access
Press the Clear and Back buttons from the Main Screen or a
telemetry screen to access Model Select.
SYSTEM SETUP
Model Type
Select from Airplane, Helicopter or Sailplane model types.
IMPORTANT: When you select a new model type, you will delete
any programming data in the current model memory. Always
confi rm the desired model memory before changing model
types.
It will be necessary to re-bind after resetting the model type.
To change the model type:
1. Scroll to the desired model type and press the scroll wheel.
The Confi rm Model Type screen appears.
2. Select Yes and press the scroll wheel to confi rm the model
type. All data will be reset. Selecting No will exit the Confi rm
Model Type screen and return to the Model Type screen.
Model Name
Model Name enables you to assign a custom name to the
current model memory. Model names can include up to 20
characters including spaces.
To add letters to a Model Name:
1. Scroll to the desired letter position and press the scroll
wheel once. A fl ashing box appears.
2. Scroll left or right until the desired character appears. Press
the scroll wheel once to save the character.
3. Scroll to the next desired letter position. Repeat Step 1 and 2
until the Model Name is complete.
4. Select BACK to return to the System Setup list.