Allied Telesis AT-FS709FC - Manual (Page 11)

1
Chapter 1
Overview
The AT-FS709FC Series device is an unmanaged, Layer 2 Fast Ethernet
switch. The switch can be used in a variety of network configurations and
topologies. You can use the switch to create small workgroups with dedicated
10/100 Mbps links to your network devices, such as your workstations,
servers, printers, and routers. You can also use the switch to interconnect
Ethernet hubs to provide a bridge between the different workgroups of your
network. Finally, you can connect the switch to other Ethernet switches to
make it part of a larger Ethernet network.
Figure 1 AT-FS709FC Series Fast Ethernet Switch
Features of the switch include:
G Eight 10/100 Mbps (10Base-T / 100Base-TX) twisted pair ports with
RJ-45 connectors
G One 100 Mbps fiber optic port with a maximum operating distance of
2 kilometers (1.25 miles)
G Full- or half-duplex operation on the twisted pair ports
G Full-duplex operation on the fiber optic ports
G Store and forward Ethernet packet handling
G MAC address table with a storage capacity of 4,000 addresses
10BASE-T / 100B
ASE-TX 8 POR
T FAST ETHERNET SWITCH
WITH 100FX UPLINK
1X
8MDI
OR 2X
3X
4X 5X
6X
7X
9
8MDI-X
POWER
LINK/A CT
100M
FDX 1 2 3 4 5 6 7 8 9 FS709FC
MUL TI MODE