Allied Telesis AT-MC1001SC/GS4 - Manual (Page 11)

1
AT-MC1001 Series Gigabit Media Converters
The AT-MC1001 Series Gigabit Media Converters include the following
models:
The AT-MC1001 Series Gigabit Media Converters are designed to extend the
distance of your network by converting Ethernet data between multimode and
single-mode fiber optic cables. Each media converter features a 1000Base-SX
port and a 1000Base-LX port. The 1000Base-SX port has a maximum
operating distance of 550 meters (1,804 feet) while the 1000Base-LX port has
a maximum operating distance of 10 kilometers (6.2 miles) to 70 kilometers
(43.4 miles), depending on the model. Both ports feature an SC connector and
operate at 1000 Mbps with half-duplex or full-duplex operation.
The media converters can be installed on a table or in an AT-MCR12 chassis.
The AT-MC1001 Series Gigabit Media Converters are easy to install and do
not require any software configuration or management. Figure 1 shows an
example of an AT-MC1001 Series Media Converter.
Figure 1 AT-MC1001 Series Gigabit Media Converter (Model AT-MC1001SC/GS2)
❑ AT-MC1001 ❑ AT-MC1001SC/GS3
❑ AT-MC1001SC/GS2 ❑ AT-MC1001SC/GS4
SINGLE MODE MULTI MODE
LNK
LNK TST
M/L ON
LNK
PWR
M/L ON
TX RX
MC1001SC/GS2 GIGABIT ETHERNET MEDIA CONVERTER
STAD
AOE
TST
TST
AC TO AC
CLASS 1
LASER PRODUCT
DO NOT STARE
INTO BEAM
1000Base-LX TX RX 1000Base-SX