Allied Telesis AT-RPS8000 - Manual (Page 9)

AT-RPS8000 Quick Install Guide
3
Reviewing Safety Precautions
Please review the following safety precautions before you begin the installation
procedure.
Caution
Electric Shock Hazard: To prevent ELECTRIC shock, do not remove
cover. No user-serviceable parts inside. This unit contains HAZARDOUS
VOLTAGES and should only be opened by a trained and qualified
technician. To avoid the possibility of ELECTRIC SHOCK disconnect
electric power to the product before connecting or disconnecting the LAN
cables.
! 5
Lightning Danger: DO NOT WORK on equipment or CABLES during
periods of LIGHTNING ACTIVITY.
! 6
CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE.
TO DE-ENERGIZE EQUIPMENT, disconnect the power cord.
! 7
Electrical—Type Class 1 Equipment
This Equipment Must Be Earthed. Power plug must be connected to a
properly wired earth ground socket outlet. An improperly wired socket
outlet could place hazardous voltages on accessible metal parts.
! 8
Electrical—Cord Notice: Use power cord, maximum 4.5 meters long,
rated minimum 10 amp, 250V, made of HAR cordage molded IEC 320
connector on one end and on the other end a plug approved by the country
of end use.
! 9
Pluggable Equipment: The socket outlet shall be installed near the
equipment and shall be easily accessible.
! 10
Air vents must not be blocked and must have free access to the room
ambient air for cooling.
! 11
Operating Temperature: This product is designed for a maximum
ambient temperature of 40°C.
! 12
All Countries: Install product in accordance with local and National
Electrical Codes.
! 13