Allied Telesis AT-FS705L - Manual (Page 31)

AT-FS705L Switch Installation Guide
21
Safety
!
4 Electrical Notices
Warning: Electric Shock Hazard
To prevent electric shock, do not remove the cover. No user-serviceable parts
inside. This unit contains hazardous voltages and should only be opened by
a trained and qualified technician. To avoid the possibility of electric shock,
disconnect electric power to the product before connecting or disconnecting
the LAN cables.
!
5 Lightning Danger
Danger: Do not work on equipment or cables during periods of lightning
activity.
Installation
!
6 Electrical - Auto Voltage Adjustment
This product will automatically adjust to any voltage between the ranges
shown on the label
!
7 Caution: Power cord is used as a disconnection device. To de-energize
equipment, disconnect the power cord.
!
8 Electrical - Type Class 1 Equipment
This Equipment Must Be Earthed. Power plug must be connected to a
properly wired earth ground socket outlet. An improperly wired socket
outlet could place hazardous voltages on accessible metal parts.
!
9 Pluggable equipment, the socket outlet shall be installed near the
equipment and shall be easily accessible.
!
10 Caution: Air vents must not be blocked and must have free access to the
room ambient air for cooling.
!
11 Operating Temperature: This product is designed for a maximum
ambient temperature of 40° degrees C.
!
12 All Countries: Install product in accordance with Local and National
Electrical Codes.
Normen: Dieses Produkt erfüllt die Anforderungen der nachfolgenden
Normen.
!
1 Hochfrequenzstörung EN55022 Klasse B
!
2 Störsicherheit EN55024
!
3 Elektrische Sicherheit EN60950 (TUV), UL60950 (
c
UL
us
)
Sicherheit
!
4 Achtung:
Gefährliche Spannung
Das Gehäuse nicht öffnen. Das Gerät enthält keine vom Benutzer wartbaren
Teile. Das Gerät steht unter Hochspannung und darf nur von qualifiziertem
technischem Personal geöffnet werden. Vor Anschluß der LAN-Kabel, Gerät
vom Netz trennen.
!
5 Gefahr Durch Blitzschlag
Gefahr: Keine Arbeiten am Gerät oder an den Kabeln während eines
Gewitters ausführen.
Installation