Installing the ar725 and ar745 – Allied Telesis AR700 Series Router User Manual
Page 6
AR700 Series Router
6
Installing the AR725 and AR745
Selecting a Site
You can install the router on a level surface such as a desktop or bench, or in a
standard 19-inch rack, using the rack-mount kit supplied with the router.
When you install the router, choose a site that:
■ allows adequate airflow around the router and its vents.
■ is free of dust and moisture.
■ will maintain an ambient temperature range of 0º C to 40º C
(32º F to 104º F) and a humidity range of 5% to 80% non-condensing.
■ has a reliable and earthed (grounded) power supply, preferably dedicated
and filtered.
■ does not expose cabling to sources of electrical noise such as radio
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
■ allows easy access to the router’s power and cable connections.
Before Installing
■ Read the safety information
.
■ Gather the tools and equipment you will need.
If you are also installing an optional Port Interface Card (PIC), you will need
the PIC and the PIC Quick Install Guide. (
“Installing expansion options” on
)
If the router is to be connected to a redundant power supply, you will need
a redundant power supply unit and cable.(
If installing a DC version of the router, you will need a DC power source,
DC supply cable, and wire strippers.(
“Applying power to DC models of
)
■ Unpack the router. Verify the package contents. If any items are damaged or
missing, contact your sales representative.
■ Place the router in its operating location. See the previous section
for guidelines on choosing a suitable location.