Allied Telesis AR700 Series Router - Manual (Page 16)

AR700 Series Router
16
■ Place the router in its operating location. See the previous section
“Selecting a Site” on page 15 for guidelines on choosing a suitable location.
Installing the AR750S router in a rack
1. Check the rack.
Ensure that the rack is safely secured and that it will not tip over. Devices in
a rack should be installed starting at the bottom, with the heavier devices
near the bottom of the rack.
Ensure the rack has sufficient space for the router and its associated cables.
The router is 1U high.
2. Unscrew the feet.
3. Connect the handles to the brackets.
Screw the handles to the wider side of each bracket, using the supplied
screws (see the figure below).
4. Connect the brackets to the router.
Screw the brackets to the sides of the router, using the supplied screws
(see figure below). The router can be front or rear mounted.
5. Mount the router in the rack.
Use appropriate rack mounting screws (not supplied).