Allied Telesis AT-PWR9000 - Manual (Page 3)

Quick Install Guide 3
C613-04040-01 REV C
Package Contents
The following items are included with each AT-RPS9000:
■ One AT-RPS9000 chassis.
■ One AT-PWR9000 power unit (pre-installed at factory).
■ Two AC power cords.
■ One DC cable for connecting the RPS to an AT-9812T or AT-9816GB switch.
■ One 19 inch rack-mount kit.
■ Two power cord retaining clips.
■ One AT-RPS9000 & AT-PWR9000 Quick Install Guide.
■ One Safety and Statutory Information booklet.
■ One warranty card.
For AT-PWR9000 power units purchased separately, the following items are
included with each unit:
■ One AT-PWR9000 power unit.
■ One DC cable for connecting the RPS to an AT-9812T or AT-9816GB switch.
■ One AT-RPS9000 & AT-PWR9000 Quick Install Guide.
■ One Safety and Statutory Information booklet.
■ One warranty card.
Contact your sales representative if any items are damaged or missing.
Selecting a Site
The AT-RPS9000 chassis can be installed in a standard 19-inch rack or on a level
surface such as a desktop or bench. When installing the RPS, choose a site that:
■ Allows adequate airflow around the RPS’s vents. If RPS units are stacked
on top of each other, their rubber feet must be fitted.
■ Is free of dust and moisture.
■ Will maintain an ambient temperature range of 0 to 40º C (32 to 104º F) and
a humidity range of 5 to 95% non-condensing.
■ Has a reliable and earthed (grounded) power supply circuit, preferably
dedicated and filtered.
■ Allows easy access to the unit’s cable connections.
■ Will allow the RPS to be connected to a power supply and its switches,
using the supplied cables. The cables will be damaged if bent excessively.