Allied Telesis AR400 Series Router - Manual (Page 14)

14 AR400 Series Router
613-000313 Rev B
AR415S Router
This section describes how to install the AR415S router.
■ “Installing the AR415S” below
■ “Configuring the AR415S” on page 18
■ “Connecting Data Cables to AR415S” on page 23
■ “System LEDs on AR415S” on page 24
For corresponding information about installing an AR410, AR410S or AR450S, see
“AR410, AR410S, AR450S Routers” on page 6 .
For corresponding information about installing an AR440S, AR441S or AR442S, see
“AR440S, AR441S, AR442S Routers” on page 25 .
Installing the AR415S
Selecting a Site
You can install the router:
■ on a level surface such as a desktop or bench
■ in a standard 19-inch rack, using the rack-mount kit supplied with the router
■ on a firm wall, using a wall-mount kit ordered from your authorised distributor
or reseller
When you install the router, choose a site that:
■ allows adequate airflow around the router and its vents
■ is free of dust and moisture
■ will maintain an ambient temperature in the range 0º C to 40º C
(32º F to 104º F)
■ will maintain a humidity in the range 5% to 80% non-condensing
■ has a reliable and earthed (grounded) power supply, preferably dedicated and
filtered
■ does not expose cabling to sources of electrical noise such as radio transmitters,
broadband amplifiers, power lines, electric motors, and fluorescent fixtures
■ allows easy access to the router’s power and cable connections
Before Installing the Router
■ Read the safety information “Safety” on page 41 .
■ Unpack the router. Verify the package contents. If any items are damaged or
missing, contact your sales representative.