Allied Telesis Removable Power Supply and Fan - Manual (Page 6)

Installation Guide
5
Package Contents
Depending on the model, switches are shipped with a single supply unit (PSU),
either AC or DC. Some models also have fan-only modules (FOM), chassis fans,
or blanking plates.
■ The AT-8948, AT-9924Ts, x900-24XT, x900-24XT-N, x900-24XS, and
AT-10408XP switches have a PSU and a FOM installed.
■ The x900-48FE, x900-48FE-N, x900-48FS, AT-9924T, and AT-9924SP
switches have a PSU and a blanking plate installed.
■ The SwitchBlade
®
x908 is shipped with dual chassis fans and blanking plates,
but no PSUs.
The following items are included with each factory-installed PSU. Contact your
authorised Allied Telesis distributor or reseller if any are damaged or missing.
■ one AC power cord (AC models)
■ one power cord retaining clip (AC models)
■ one warranty card
The following items are included with PSUs when purchased separately:
■ one AC power cord (AC models)
■ one power cord retaining clip (PWR01 and PWR02 AC models only)
■ one clip-on ferrite core (PWR05 only)
■ this Installation Guide
■ one warranty card
The following items are included with fans when purchased separately:
■ this Installation Guide
■ one warranty card