beautypg.com

Troubleshooting – Allied Telesis Removable Power Supply and Fan User Manual

Page 16

background image

Installation Guide

15

Troubleshooting

If the PSU does not function as expected:

check that all cable connections are correct and secure.

check that the standby switch has been pressed and is in the On position
(DC models).

check that the PSU is receiving the correct AC voltage (AC models).

if LEDs indicate a PSU fault, replace the PSU or have your authorised Allied
Telesis distributor or reseller service it.

Troubleshooting information is also in the x900 Series Switch and
SwitchBlade

®

x908 Hardware Reference and the AT-10408XP Installation Guide. You

can download these documents from

www.alliedtelesis.com/support/software

.