Allied Telesis AlliedView-EMS 3.11 AMIGO - Manual (Page 9)

AlliedView™-EMS 3.11 AMIGO USERS GUIDE Page 9 of 43
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView
-SecLevel noAuthNoPriv
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword PASS1233
2.1.8 Authentication Protocol
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authNoPriv or
authPriv
, then you must specify an Authentication Protocol that is configured for the User
Account Name on the target host. The available Authentication Protocols are MD5 and
SHA
.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView
-SecLevel authNoPriv -AuthProtocol MD5 -AuthPassword PASS1234
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword PASS1233
2.1.9 Authentication Password
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authNoPriv or
authPriv
, then you must specify an Authentication Password that is configured for the User
Account Name on the target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView
-SecLevel authNoPriv -AuthProtocol MD5 -AuthPassword PASS1234
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword PASS1233
2.1.10 Privacy Protocol
If you specified 3 (SNMPv3) for the SNMP Version, and your Security Level is authPriv, then
you must specify a Privacy Protocol that is configured for the User Account Name on the
target host. The available Privacy Protocol is DES.