Allied Telesis AlliedView-EMS 3.11 AMIGO - Manual (Page 8)

AlliedView™-EMS 3.11 AMIGO USERS GUIDE Page 8 of 43
2.1.4 Get Community
Get Community is an SNMP community string used to get MIB values from the agent. You
must specify the same community string as the one configured on the target host. If the
string is not specified, the default community string "public" is used.
Example:
Amigo -TargetHost 172.16.18.34 -GetCommunity dvcmgrget
2.1.5 Set Community
Set Community is an SNMP community string used to change the values of the agents' MIB
variables. You must specify the same community string as the one configured on the target
host. If the string is not specified, the default community string "private" is used.
Example:
Amigo -TargetHost 172.16.18.34 -SetCommunity dvcmgrset
2.1.6 User Account Name
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a User Account
Name that is already configured on the target host.
Examples:
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView
-SecLevel noAuthNoPriv
Amigo -TargetHost 172.16.99.123 -SnmpVersion 3 -UserName AlliedView1
-SecLevel authNoPriv -AuthProtocol SHA -AuthPassword PASS1233
2.1.7 Security Level
If you specified 3 (SNMPv3) for the SNMP Version, you must also specify a Security Level
that is configured for the User Account Name on the target host. The available Security
Levels are noAuthNoPriv, authNoPriv, and authPriv.