Allied Telesis AlliedView-EMS 3.11 AMIGO - Manual (Page 16)

AlliedView™-EMS 3.11 AMIGO USERS GUIDE Page 16 of 43
When you first run AMIGO, the Personal MIB tree is empty (root node only). To create
your own tree, follow the steps below.
1. On the General MIB tree tab, copy MIB objects to the clipboard by selecting Edit >
Copy. Select multiple objects by using the Shift or Ctrl keys.
2. On the Personal MIB tree tab, click the place where you want to insert the copied
objects.
3. Paste previously copied objects by selecting Edit > Paste.
Copy and Paste operations can also be done using the toolbar buttons.
To delete MIB objects from the Personal MIB tree, follow the steps below.
1. Select the MIB object(s) to delete on the Personal MIB tree.
2. Select Edit > Delete.
Note - You cannot paste or delete objects on the General MIB tree. You can only copy
objects.
3.1.3 Target Device
You can add target devices to the General MIB tree. To add a target device, open the
"Setting target devices" window by selecting File > Target Device. Enter the host name, then
click Add to include the new target device in the General MIB tree.
Note - You can also add a target device to the General MIB tree by selecting File > Property.
This opens the "Setting environment for Amigo" window. Click the "Setting target devices
tab" and add the new target device.
Set target device