beautypg.com

Allied Telesis AT-CV1203 User Manual

Page 34

background image

Chapter 2: Installation

34

4. Connect the power cord to an appropriate power source. For the

power requirements, refer to “Power Specifications” on page 37. The
chassis is now ready for network operations.

5. If you purchased a second power adapter, repeat this procedure to

install it.

Note

Connecting the two power supplies to different circuits will protect
the unit from a power circuit failure.

Warning: Power cord is used as a disconnection device. To de-
energize equipment, disconnect the power cord.

E3

Pluggable Equipment. The socket outlet shall be installed near
the equipment and shall be easily accessible.

E5