Allied Telesis x600-48Ts/XP - Manual (Page 61)

x600 Layer 3 Gigabit Ethernet Switch Installation Guide
61
System Fault LED is Steadily On
If the system FAULT LED is steadily on, a problem has occurred in the
switch. Do the following:
ˆ Reset the switch by disconnecting and reconnecting the AC power
cord.
ˆ If the FAULT LED remains ON, download a new version of the switch’s
operating system software. For instructions, refer to the AlliedWare
Plus
TM Operating System Software Reference Guide.
Note
If the FAULT LED remains steadily on, contact Allied Telesis
Technical Support for assistance. See “Contacting Allied Telesis” on
page 12.