Allied Telesis x600-48Ts/XP - Manual (Page 38)

Chapter 2: Installing the Hardware
38
Unpacking a Switch
To unpack a switch, perform the following procedure:
1. Remove all components from the shipping packages.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Make sure the following components are included in your switch
package. If any item is missing or damaged, contact your Allied
Telesis sales representative for assistance.
ˆ One x600 Series Layer 3 Gigabit Ethernet Switch
ˆ Two rack-mount brackets
ˆ Eight flathead Phillips rack-mount bracket screws
ˆ AC power cord (Americas, Australia, EU, Japan, and UK only)
ˆ AC power cord retaining clip
ˆ Management cable for local management