Allied Telesis AT-6101GP - Manual (Page 24)

Chapter 2: Installation
20
Choosing a Site for the AT-6101GP PoE Injector
Observe these guidelines when planning the installation of the
AT-6101GP
 If you plan to install the power injector on a table, the
table should be level and stable.
 The power outlet should be located near the power
injector and be easily accessible.
 The site should allow for easy access to the ports on
the front of the power injector, so that you can easily
connect and disconnect cables, and view the port
LEDs.
 The site should not expose the power injector to
moisture or water.
 The site should be a dust-free environment.
 The site should include dedicated power circuits or
power conditioners to supply reliable electrical power
to the network devices.