beautypg.com

Installing the switch in an equipment rack – Allied Telesis AT-GS900/8PS User Manual

Page 38

background image

Chapter 2: Installation

38

Installing the Switch in an Equipment Rack

To install the switch in a standard 19-inch equipment rack, perform the
following procedure:

1. If the rubber feet are attached to the bottom of the switch, remove

them using a flat-head screwdriver.

2. Attach the two rack mount brackets to the sides of the switch using the

eight bracket screws that are provided. There are four possible
positions in which the brackets may be installed.

Figure 6. Attaching the Rack-Mount Brackets to the Switch

3. Mount the switch in a standard 19-inch equipment rack using four

equipment rack screws provided.