Allied Telesis AT-GS950/16 - Manual (Page 189)

AT-GS950/16 Web Interface User Guide
189
Modify In-Profile
Action
To modify a In-Profile action entry, perform the following procedure:
Note
You must first enter a In-Profile action before you can modify it. See
“Create In-Profile Action” on page 187 for more information.
1. From the main menu on the left side of the page, select the Access
Control Config folder.
The Access Control Config folder expands.
2. From the Access Control Config folder, select In-Profile Action.
An example of the Create In-Profile Action page with a In-Profile Action
table entry is shown in Figure 66 on page 188.
3. Select the table entry that you want to modify and click the modify link
in the Action column.
The Modify In-Profile Action page will be displayed. See Figure 67 on
page 189.
Figure 67. Modify In-Profile Action Page
4. Change the parameters as required.
Note
See “Create In-Profile Action” on page 187 for the definitions of each
parameters.
5. Click Apply.
The modified In-Profile action entry is displayed in the table at the
bottom of the page of the Create In-Profile Action page.
6. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.