Allied Telesis AT-2874SX - Manual (Page 70)

AT-2874SX Gigabit Ethernet Fiber ExpressCard Installation and User’s Guide
70
Transmit Buffers
The Transmit Buffers property specifies the number of packet transmit
buffers allocated for the adapter.
To change the Transmit Buffers value, do the following:
1. Access the Device Manager on your operating system.
See “Accessing Advanced Properties” on page 47.
2. Select Transmit Buffers in the Property box.
The Transmit Buffers page is displayed as shown in Figure 44.
Figure 44. Transmit Buffers Page
3. Specify the number of transmit buffers that you want the system
allocates.
The range of the value is from 100 to 600. The default value is 500.
4. Click OK.