Allied Telesis AT-2874SX - Manual (Page 39)

Chapter 3: Installing the Driver Software
39
Executing the Setup Program
To install the driver software for the AT-2874SX ExpressCard, do the
following:
1. Locate the AT-2874SX setup zip folder that you downloaded from the
Allied Telesis website onto your system.
See “Downloading the Setup File” on page 38.
2. Extract files from the zip folder.
3. Open the folder including uncompressed files. Figure 21 shows an
example.
Figure 21. Setup File
4. Double-click the setup.exe file.
The User Account Control window appears, prompting you to allow the
Marvell Miniport Driver program to make a change on your system.
Note
If you are using Windows XP operating system, the User Account
Control window does not come up. Go to step 5.