Allied Telesis AT-2874SX - Manual (Page 22)

AT-2874SX Gigabit Ethernet Fiber ExpressCard Installation and User’s Guide
22
Installing the AT-2874SX ExpressCard
The following instructions describe how to install the AT-2874SX
ExpressCard in a laptop computer equipped with a 34 mm or 54 mm PCI
ExpressCard interface slot. The installation illustrations in this manual use
the 54 mm interface.
For additional information about installing an PCI ExpressCard on your
particular laptop, refer to the manual that was supplied with your laptop.
Note
To perform the following procedure, you need to supply a pen.
To install an AT-2874SX ExpressCard, do the following:
1. Review the “Pre-Installation Checklist” on page 21 and “Reviewing
Safety Precautions” on page 20.
2. Select the 34 mm or 54 mm ExpressCard slot.
See Figure 5 for an example of the 54 mm ExpressCard slot.
Note
If you do not know how to identify a PCI ExpressCard slot, refer to
your laptop documentation.
Figure 5. Selecting the PCI ExpressCard Slot
3. Use a pen and press the button toward the laptop and to the left. See
Figure 6 on page 23.