Allied Telesis AT-2874SX - Manual (Page 59)

Chapter 4: Modifying Advanced Properties
59
Max IRQ per Sec
The Max IRQ per Sec property specifies the interrupt rate for Interrupt
Moderation. See “Interrupt Moderation” on page 50.
To change the Max IRQ per Sec value, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 47.
2. Select Max IRQ per Sec in the Property box.
The Max IRQ per Sec page is displayed as shown in Figure 36.
Figure 36. Max IRQ per Sec Page
3. Specify the Max IRQ per Sec value.
The range of the value is from 1000 to 30000. The default value is
5000.
4. Click OK.