Allied Telesis AT-2874SX - Manual (Page 62)

AT-2874SX Gigabit Ethernet Fiber ExpressCard Installation and User’s Guide
62
Receive Buffers
The Receive Buffers property specifies the number of packet receive
buffers allocated for the adapter. Increasing this value may enhance
performance in receiving traffic, but consumes more system memory.
To change the Receive Buffers value, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 47.
2. Select Receive Buffers in the Property box.
The Receive Buffers page is displayed as shown in Figure 38.
Figure 38. Receive Buffers Page
3. Specify 256 or 512.
The value is an increment of 256 and the range is from 256 to 512.
The default value is 256.
4. Click OK.