beautypg.com

Saving the changes – Allied Telesis AT-UWC Wireless LAN Controller User Manual

Page 26

background image

AT-UWC Wireless LAN Controller

26

Saving the Changes

When you change settings of the AT-UWC WLAN Controller and click the
Submit button on each page, the changes are stored in the running
configuration. The settings in the running configuration are deleted when
the AT-UWC WLAN Controller reboots. You must save the changes to the
startup configuration if you want to keep the changes after the AT-UWC
WLAN Controller reboots.

To save the changes to the startup configuration, do the following:

1. Start a management session. See “Starting a Management Session”

on page 11.

The Allied Telesis Unified Wireless Controller starts as shown in
Figure 26.

Figure 26. AT-UWC WLAN Controller Screen

2. From the Navigation panel on the left, go to System > Save All

Applied Changes.

The Save All Applied Changes screen is displayed as shown in Figure
27 on page 27.