Allied Telesis AT-UWC Wireless LAN Controller - Manual (Page 11)

Installation Guide
11
Starting a Management Session
The AT-UWC WLAN Controller is managed from the management
workstation through the web interface.
To start a management session of the AT-UWC WLAN Controller, do the
following:
1. Login to the management workstation.
If you do not have a management workstation, see “Preparing the
Management Workstation” on page 10.
2. Open Internet Explorer 7 or 8, and enter the IP address of the
AT-UWC WLAN Controller server.
The default IP address is
192.168.1.1
.
3. Enter the user name and password. See Figure 8.
The following are the default settings:

User name: manager

Password: friend
Figure 8. AT-UWC WLAN Controller Login Screen
4. Press Login.