Allied Telesis AT-UWC Wireless LAN Controller - Manual (Page 14)

AT-UWC Wireless LAN Controller
14
4. Enter your serial number and authentication key.
5. Press Submit.
6. From the Navigation panel on the left, go to System Utilities >
System Reset.
7. Click Reset.
The AT-UWC WLAN Controller server reboots.
Note
To reboot the AT-UWC WLAN Controller from a PC-based server,
press Ctrl+Alt+Delete keys from the keyboard of the server.
8. From the Navigation panel on the left, go to System > License >
License.
The license Management screen appears as shown in Figure 11.
Figure 11. AT-UWC WLAN Controller License Management Screen
9. Confirm that the license key is properly registered.
10. If you want to add another license key, repeat steps 2 to 5.
Note
When you add another license key, you do not need to reboot the
AT-UWC WLAN Controller server.