AFX CNP340041LSNYWH - Manual (Page 2)

CENTRE LED PENDANTS
Models: CNP3400 Series
2 of 2
Limited Factory Warranty
AFX Lighting warrants this fixture is free from defects in materials and workmanship when installed and used under normal ope
of purchase. This warranty covers all component parts and extends only to replacement of defective fixture or components; it
misuse, mishandling or damage incurred in transit
3. Mounting
A. (driver are not shown):
Make sure all six cables (6)
balance (5) are all the same length. If any length adjustment is needed,
the fixture so the balance will be free hanging on the cables. Push the
adjustment knob (11) in the direction of the arrow
The cables are pulled by the weight of the balance (5) until they are all the
same length.
B. Align the canopy (4) open slots with three gem bar screws (3)
Install the fixture by inserting
the canopy
(4) open slots and turning canopy clockwise.
Tighten the screws.
4. Shade Installation.
A. Thread in the glass shade (9)
holder (7) and tighten it.
shade style have the same thread.
5. Restore power at fuse or circuit breaker box.
6. Replacement of LED Module.
A. Remove Diffuser (9) by turning it counter clockwise
B. Hold the housing (7) and turn LED module (6) counter clockwise to remove it.
C. Insert new LED lamp into the lamp socket
clockwise until the lamp snaps in
D. Re-attached glass diffuser
CENTRE LED PENDANTS
CNP3400 Series
AFX Lighting warrants this fixture is free from defects in materials and workmanship when installed and used under normal ope
of purchase. This warranty covers all component parts and extends only to replacement of defective fixture or components; it
misuse, mishandling or damage incurred in transit
(driver are not shown):
cables (6) for each light between the canopy (4) and the
the same length. If any length adjustment is needed,
the fixture so the balance will be free hanging on the cables. Push the
in the direction of the arrow to even the cable lengt
The cables are pulled by the weight of the balance (5) until they are all the
Align the canopy (4) open slots with three gem bar screws (3)
Install the fixture by inserting the head of the screws thru
and turning canopy clockwise.
A. Thread in the glass shade (9) metal insert into the lamp
The conical shade style is shown, all
shade style have the same thread.
power at fuse or circuit breaker box.
of LED Module.
Remove Diffuser (9) by turning it counter clockwise.
and turn LED module (6) counter clockwise to remove it.
Insert new LED lamp into the lamp socket located in the housing
the lamp snaps in place.
attached glass diffuser
LED Pendant Fixtures
120VAC / 60Hz
AFX Lighting warrants this fixture is free from defects in materials and workmanship when installed and used under normal operating conditions for a period
of purchase. This warranty covers all component parts and extends only to replacement of defective fixture or components; it does not cover failure due to improper installation,
between the canopy (4) and the
the same length. If any length adjustment is needed, hold
the fixture so the balance will be free hanging on the cables. Push the
to even the cable length.
The cables are pulled by the weight of the balance (5) until they are all the
Align the canopy (4) open slots with three gem bar screws (3).
metal insert into the lamp
The conical shade style is shown, all
and turn LED module (6) counter clockwise to remove it.
cated in the housing (5) and turn it
LED Pendant Fixtures
8060745 R0
rating conditions for a period of 3 years from date
does not cover failure due to improper installation,