Samsung LE40B650T2W - Manual (Page 32)

English - 30
using the remote Control Buttons in the Product guide Menu
Button operations
Yellow Button Shows the contents of the Product guide sequentially. (Auto Play)
◄/► Move the cursor and select an item.
ENTErE Select the currently selected item.
rETurN Return to the previous menu.
EXIT Stop the current function and return to the Product guide main menu.
Self Diagnosis
Picture Test
If you think you have a picture problem, perform the picture test. Check the colour pattern on
the screen to see if the problem still exists.
Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.
There may be a problem with the TV. Therefore, contact Samsung’s call centre for
assistance.
No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device’s user manual.
Sound Test
If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound
through the TV.
If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV
speaker in the Sound menu.
The melody will be heard during the test even if
Speaker Select is set to External Speaker or the sound is muted by pressing
the MuTE button.
Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with
the TV. Therefore, contact Samsung’s call centre for assistance.
No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device’s user manual.
Signal Information (digital channels only)
Unlike analogue channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
❑
■
●
●
■
N
N
●
●
■
N
Self Diagnosis
U Move E Enter R Return
Picture Test ▶
Sound Test
Signal Information
BN68-02325A-04Eng.indb 30 2009-10-08 �� 9:53:34