AMX Novara 1000 Series - Manual (Page 53)

AMX NOVARA DCS1000 Device Configuration Software
47 Novara ControlPads & KeyPads
3. Select ‘On’ from the Select Action drop-down menu.
4. Click the Add to Script button. The Event Script window indicates Event 1 as being the chosen button
feedback: On (FIG. 21).
5. With button 2 selected, select Flash from the Select Button Feedback drop-down menu, and click on Add
To Script add this feedback to the script. The Event Script will now show Event 2 as Button 2
Feedback: Flash (FIG. 22).
6. Download the program to the ControlPad - see the Downloading the Program to the ControlPad section
on page 46.
7. When the panel has been loaded press the configured button on the ControlPad (in this example, button
#1). The chosen button for Event1 will illuminate and the button for Event2 will flash.
8. Try configuring other buttons with On / Off / Flash actions.
9. To Save your program, select File > Save from the menu bar.
FIG. 20 Select Button Feedback window
FIG. 21 Event Script window - Event 1
FIG. 22 Event Script window - Event 2
Click to select button
by number (1-8)
AMX NOVARA DCS1000 data files are saved with the extension *.NVA.