Samsung UN110S9VFXZA - Manual (Page 30)

Issues Solutions and Explanations
The TV won’t turn on. Make sure the AC power cord is securely plugged in to
the wall outlet and the TV.
Make sure the wall outlet is working.
Try pressing the
P button on the TV to make sure the
problem is not the remote. If the TV turns on, refer to
“Remote control does not work” below.
There is no picture/video. Check the cable connections. Remove and reconnect
all cables connected to the TV and external devices.
Set the video outputs of your external devices (Cable/
Sat Box, DVD, Blu-ray etc) to match the TV's input
connections. For example, if an external device’s
output is HDMI, it should be connected to an HDMI
input on the TV.
Make sure your connected devices are powered on.
Be sure to select the correct input source.
Reboot the connected device by unplugging it, and
then reconnecting the device’s power cable.
The remote control does
not work. Replace the remote control batteries. Make sure the
batteries are installed with their poles (+/–) in the
correct direction.
Clean the sensor’s transmission window on the
remote.
Try pointing the remote directly at the TV from 5~6
feet away.
The cable/set top box
remote control doesn’t
turn the TV on or off or
adjust the volume. Program the Cable/Set remote control to operate the
TV. Refer to the Cable/Set-Top-Box user manual for
the SAMSUNG TV code.
‐ This TFT LED panel is made up of sub pixels which require
sophisticated technology to produce. There may be, however, a few
bright or dark pixels on the screen. These pixels will have no impact
on the performance of the product.
‐ To keep your TV in optimum condition, upgrade to the latest
software. Use the Update Now or Auto Update functions on the TV's
menu (Screen MENU > Support > Software Update > Update now or
Screen MENU > Support > Software Update > Auto Update).
English - 30 English - 31
[UN110S9VF-ZA]BN68-06328B-00ENG.indb 30 2014-05-28 10:43:39