Samsung UN110S9VFXZA - Manual (Page 21)

Switching Between Video Sources
Press the SOURCE button to switch between external devices connected
to the TV. For example, to switch to a game console connected to the
second HDMI connector, press the SOURCE button. The Source List
appears across the top of the screen. From the Source list, select HDMI2.
‐ The connector names may vary depending on the product.
Using the Remote Control to Control External
Devices
MENU > System > Universal Remote Setup
The universal remote control feature lets you control cable boxes, Blu-ray
players, home theaters, and other third-party external devices connected
to the TV using the TV's remote control. For each external device you
want to control, you must run the universal remote set up process. The
first step in the process is connecting the IR extender cable (included) to
the TV and positioning the transmitter end of the cable in front of the
device you want to control.
‐ You can also use the Anynet+ (HDMI-CEC) function to operate
external Samsung devices with your TV's remote control without any
additional setup.
Connecting the IR Extender Cable
‐ The color and design of the IR extender cable may vary depending on
the model.
4 inches
To begin the universal remote set up process, connect the IR extender
cable (included) to the TV's IR output connector as shown in the
diagram, and then position the transmitter end within 4 inches (10 cm)
of the external device's remote control sensor, pointing in the direction
of the sensor.
There can be no obstacles between the transmitter end of the IR
extender cable and the external device. Any obstacles will interfere with
the transmission of the remote control signals.
English - 20 English - 21
[UN110S9VF-ZA]BN68-06328B-00ENG.indb 21 2014-05-28 10:43:37