Usb interface (scl870 only) – Samsung SC-L870-XAP User Manual

Page 65

Text mode
Original mode

ENGLISH

Connecting to a PC

1. Connect a USB cable to the USB port on the PC.

2. Connect the other end of the USB cable into the proper terminal on the camcorder. (USB jack)

3. Connect the audio cable to the Line input jack of the PC.

If the PC has no Line input jack, connect the audio cable to the MIC input jack.
In this case, however, a noise may be produced depending on the PC.

Notes

■

If you disconnect the USB cable from the PC or the camcorder while transferring, the data transmission will stop
and the data may be damaged.

■

If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable along with other
USB devices, the camcorder may not work properly.
-

In this case, remove the other USB devices from the PC and reconnect the camcorder.

USB interface (SCL870 only)

MIC

USB Cable

USB AUDIO Cable