Playing back a tape – Samsung SC-L870-XAP User Manual
Page 58
ENGLISH
58
Playing back a Tape
Notes:
■
SCL810/L860/L870 feature a monaural audio system. If your TV or VCR are stereo,
connect the audio cable to input “L” of your TV or VCR.
■
You can use an S-VIDEO cable to obtain better quality pictures if you have an S-VIDEO connector on your TV.
■
While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion may occur.
Playback
1. Use the TV/VIDEO button to select VIDEO on your TV.
2. Connect power source (battery or AC Power Adapter) to the camcorder.
Set the power switch to PLAYER mode.
3. Insert a tape you want to see.
■
Make sure that STOP is displayed.
4. Press the
(PLAY/STILL) button.
■
The picture you recorded appears on the TV after 2 to 3 seconds.
■
Press
■
(STOP) to stop playing.
■
If the tape reaches its end during playback,
the tape will rewind automatically.
Notes:
■
Vibration from the built-in speaker can cause picture distortion.
■
It is best to turn the built-in speaker off when your camcorder is connected to the TV.
■
The system (Hi8/8mm) is selected automatically, depending on the tape format.
■
This camcorder does not support LP recording and playback.
PLAYER
PLAY/STILL