Samsung LS57BPHNBG-ZA - Manual (Page 35)

English - 35
➢ The standard dimensions for wall mount kits are shown in the table.
➢ When purchasing our wall mount kit, a detailed installation manual and all parts necessary for
assembly are provided.
➢ Do not use screws longer than the standard dimension, as they may cause damage to the inside of
the PDP Display set.
➢ For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on their specifications.
➢ Do not use screws that do not comply with the VESA standard screw specifications.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
➢ Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
➢ Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our
dedicated wall mount kit for this model.
➢ Do not exceed 15 degrees tilt when mounting this PDP Display.
Do not install your Wall Mount Kit while your PDP Display is turned on.
It may result in personal injury due to electric shock.
Using the Stand-Base
➢
 Two or more people should carry the PDP. Never lay the
PDP on the floor because of possible damage to the screen.
Always keep the PDP upright.
BN68-01364A-02Eng_1009.indd 35 2007-10-09 ¿АИД 2:24:36