Samsung SPH-M810HAASPR - Manual (Page 108)

96 2A. Sprint Service: The Basics
To place roaming calls with Call Guard on:
1. From standby mode, dial 1 + area code + the
seven-digit number and tap
.
2. Touch OK .
To answer incoming roaming calls with Call Guard on:
1. Press . (A message is displayed notifying
you that roaming charges will apply.)
2. Tap OK .
Data Roam Guard
Depending on service availability and roaming
agreements, your device may be able to access data
services while roaming on certain digital systems.
You can set your device to alert you when you are
roaming off the Nationwide Sprint Network and try to
use data services such as messaging.
To set your Data Roam Guard notification:
1. Press > and tap > Wireless &
networks > Mobile networks .
2. Tap Data Roaming Guard .
3. Tap an onscreen option: On or Off .
To use data services when Data Roam Guard is active:
ᮣ When a pop-up notification appears informing you
that data roam charges may apply, tap
Connect or
Always Connect to connect.
Note: Call Guard is turned on by default on your device.
Voice dialing and speed dialing are not available when
you are roaming with Call Guard enabled.
Note: If the Call Guard feature is set to On , you need to take
extra steps (such as dialing 1 + area code) to make
and receive roaming calls.
Note: Data Roam Guard is turned on by default on your
device.
SPH-M910_BasicsGuide.book Page 96 Wednesday, June 9, 2010 3:56 PM