Samsung DVD-VR325-XAA - Manual (Page 46)

46 - English
P
layback
Using the Markers
1 Press the MARKER button during playback.
2 Press the ENTER button when the desired scene
appears.
• The number 01 is displayed and the scene is
memorized.
3 Press the œ √ buttons to move to the next
position.
4 Press the ENTER button again when the desired
scene appears.
• The number 02 is displayed and the scene is
memorized.
• DVD-RAM or DVD-RW (VR mode) discs have
the Marker function instead of the Bookmark
function. The Marker function allows you to mark
up to 99 scenes. Since the scenes may be dis-
played as many different pages, numbering is
necessary. If a disc in use is encoded with Disc
Protect, Markers cannot be set or deleted. Only
playback is available.
❚
Playing back a Marker
1 Press the MARKER button during playback.
2 Press the œ √ buttons to select a marked scene.
3 Press the ENTER or √ll button to start playing
from the selected scene.
• If you press the NEXT SKIP (√√
l )button or the
PREVIOUS SKIP( l œœ)button in marker mode,
and the next or current marked point plays for
shorter than three seconds, playback starts from
the previous marked point.
❚
Clearing a Marker
1 Press the MARKER button during playback.
2 Press the œ √ buttons to select a marked scene.
Press the CLEAR button to delete the selected
mark.
• When a marker is cleared while DVD-RAM/
-RW (VR mode) is playing, marker numbers will
change. For example, if the 7th marker is cleared
after ten markers are registered, the marker
numbers after the eighth will automatically move
ahead by one and the 8th marker becomes the
7th.
RETURN CANCEL MOVE PLAY
Marker N:1 01
RETURN CANCEL MOVE PLAY
Marker N:2 01 02
RETURN SELECT
Marker N:0
RETURN CANCEL MOVE PLAY
Marker N:2 01 02
Marker 01 02 03 04 05 06 07 08 09 10 N:10
RETURN CANCEL MOVE
Marker
PLAY
01 02 03 04 05 06 07 08 09 N:9
(VR mode)