Samsung MX-HS7000-ZA - Manual (Page 8)

Rear Panel
2
3
4
5
6
7
1
MX-HS6000
2
3
4
5
6
7
1
MX-HS7000
1
Cooling fan
• The fan operates while the unit is powered
on.
If you set the unit to the minimum volume,
the fan won't operate.
Secure a minimum of 6 inches (15 cm) of
clear space on all sides of the fan when
installing the product.
2
AUX IN 2 Terminals
1. Use an Audio Cable (not supplied) to
connect AUX IN 2 on the product to Audio
Out on an external analog output device.
• Be sure to match connector colors.
• If the external analog output device has
only one Audio Out jack, connect either
left or right terminal.
• Press the TUNER/AUX button to select
AUX 2.
• If the product is in AUX mode for more
than eight hours and no buttons on the
front panel or remote are pushed, the
system will turn off.
3
FM Antenna Terminals
1. Connect the FM antenna to the FM
antenna connector terminal.
2. Slowly move the antenna wire until you find a
location where reception is good, then fasten
it to a wall or other rigid surface.
3. If reception is poor, you may need to install
an outdoor antenna. To do so, connect an
outdoor FM antenna to the FM socket on
the rear of the system using a 75Ω coaxial
cable (not supplied).
4 LED Terminals for Speaker Beat Waving.
5
ONLY FOR SERVICE
• This jack is just for testing, please don't use
it.
6
POWER
• Insert only provided power cable.
7
2.1 CH Speaker Terminals (MX-HS6000)
2.2 CH Speaker Terminals (MX-HS7000)
1. To achieve the correct sound quality,
when you connect the speakers, match
the color of the speaker plugs to the color
of the speaker jacks. See below.
• LEFT channel (marked ).
• RIGHT channel (marked ).
• Don't force the Purple SUBWOOFER
connector into the White or Red speaker
jack.
Getting Started
8
English
02680D-MX-HS6000-ZA-ENG-20140304.indd 8 2014/3/17 15:47:35