Samsung MX-HS7000-ZA - Manual (Page 20)

Using My Karaoke
You can use the MY Karaoke function to sing
along with your favorite CDs and USB tracks.
1. Connect the microphone to the MIC jack
on the front of the product.
• If your microphone plug is smaller than
the 6.3mm (0.25 in) MIC jack, you need
a Connector-Adaptor (not supplied) to
complete the connection.
- First, connect the Connector-Adaptor to the
MIC jack on the front of the product,
- Second, connect the microphone (with
larger jack) to the Connector-Adaptor.
2. Press the MIC VOL-, + button on the
remote control to adjust the volume of
the microphone.
3. Press the MY KARAOKE button on the
remote control to suppress the vocal if you
need to. Each time the button is pressed,
the selection is changed as follows:
ON ; OFF
• If you hear strange noises (squealing or howling)
while using the Karaoke feature, move the
microphone away from the speakers. Turning
down the microphone's volume or the speaker
volume is also effective. Do not aim the
MICROPHONE towards the SPEAKERS.
• The microphone does not operate in the AUX
and TUNER mode.
• If you connect a microphone, GIGA SOUND
automatically turns off. To turn Giga Sound back
on you must remove the microphone, and then
press the GIGA SOUND BEAT button.
• When My Karaoke is on, GIGA SOUND BEAT
does not work.
• When you turn My Karaoke off, all My
Karaoke settings are lost.
• My Karaoke is only available when a
microphone is connected to the Hi-Fi
Component.
• MY KARAOKE does not operate in the
Bluetooth, TV SoundConnect, FM, and AUX
mode.
Auto Change Function
You can play a disc followed by a USB device
connected to USB1 and/or USB2 continuously.
1. Press the AUTO CHANGE button to select a
setting, and then press ¬ to apply your
selection.
• If Program Play has not been set in CD/USB
mode, the settings change as follows:
AUTO CHANGE OFF ; AUTO CHANGE ALL
• If Program Play has been set in CD/USB mode,
the settings change differently:
AUTO CHANGE OFF ; AUTO CHANGE
ALL ; AUTO CHANGE PROGRAM
- When the AUTO CHANGE mode is "ALL",the
Hi-Fi Component will play music from DISC,
USB1, and USB2 continuously.
- When the auto change mode is
"PROGRAM" ,the Hi-Fi Component will play a
disc in the disc slot, then play files on a USB
device connected to USB1, and then play files
on a USB device connected to USB2. The files
will be played continuously.
- If you press the POWER button, another
function button, or the OPEN/CLOSE button,
the AUTO CHANGE function automatically
switches to "OFF" mode.
- When the Auto Change mode is "ALL or
PROGRAM", the main unit cannot record.
- When the Auto Change mode is "ALL or
PROGRAM", the REPEAT and SLEEP functions
automatically switch to OFF.
- When the Auto Change mode is "ALL or
PROGRAM", the REC SPEED, USB REC, REPEAT,
DELETE, and SLEEP functions do not work, and
the unit displays AUTO CHANGE mode.
- When the DISC play ends, if there's no device
connected to USB1 and/or USB2, the unit will
continue to play the disc.
- When USB play ends, if there's no disc in the
unit, the unit will continue to play music from
USB1 and/or USB2.
Listening to the Radio
To Store the Stations You Want
You can store up to: 15 FM stations .
1. Select FM by pressing the TUNER/AUX
button.
2. To search for a station, press the TUNING
MODE button on the remote control or the
STOP button on the product one or more
times until MANUAL is displayed.
Functions
20
English
02680D-MX-HS6000-ZA-ENG-20140304.indd 20 2014/3/17 15:47:45