Samsung MX-HS7000-ZA - Manual (Page 18)

✎ Only one Bluetooth device can be paired at
a time.
✎ Once you have turned off the Hi-Fi
Component and the pairing is disconnected,
the pairing will not be restored
automatically. To reconnect, you must pair
the device again.
✎ The Hi-Fi Component system may not search
or connect properly in the following cases:
- If there is a strong electrical field around
the Hi-Fi Component.
- If several Bluetooth devices are
simultaneously paired with Hi-Fi
Component.
- If the Bluetooth device is turned off, not
in place, or malfunctions.
- Note that such devices as microwave
ovens, wireless LAN adaptors, fluorescent
lights, and gas stoves use the same
frequency range as the Bluetooth device,
which can cause electric interference.
To disconnect the Bluetooth device
from the Hi-Fi Component
You can disconnect the Bluetooth device from
the Hi-Fi Component. For instructions, see the
Bluetooth device's user manual.
• The Hi-Fi Component will be disconnected.
• When the Hi-Fi Component is disconnected
from the Bluetooth device, the Hi-Fi
Component will display BT DISCONNECTED
;
BT READY on the its display.
To disconnect the Hi-Fi Component
from the Bluetooth device
Press the CD/Bluetooth button on the front
panel of the Hi-Fi Component to switch from
Bluetooth mode to another mode or turn off
the Hi-Fi Component. The currently connected
device is disconnected.
|NOTES |
✎ The connected Bluetooth device will wait a
certain amount of time for a response from
the Hi-Fi Component before terminating the
connection.(Disconnection time may differ,
depending on the Bluetooth device)
✎ In Bluetooth connection mode, the
Bluetooth connection will be lost if the
distance between the Hi-Fi Component and
the Bluetooth device exceeds 16.25 feet (5
meters).
✎ If the Bluetooth device comes back into the
effective range after disconnecting, you can
restart the Hi-Fi Component to restore the
pairing with the Bluetooth device.
✎ The Hi-Fi Component automatically turns
off after 25 minutes in the Ready mode.
✎ When a Bluetooth device is connected
to the Hi-Fi Component system, the
Component system automatically switches
to the Bluetooth mode if it is in a different
mode (except when it is displaying
"REQUEST" in the TV SoundConnect mode).
Using The Bluetooth Power On
When the product is turned off, you can
connect your smart device to the product via a
Bluetooth connection to turn it on.
1. Turn on the product,press and hold the
Bluetooth button on the remote to set
the Bluetooth Power On function on.
Bluetooth Power On appears on the
display.
2. When the product is off, connect
your smart device to the product via
Bluetooth. (For information on Bluetooth
connections, refer to your smart device’s
manual.)
• The Bluetooth device paired with your
product before.
3. When the connection is complete, the
product turns itself on automatically in
Bluetooth mode.
• Select the desired music to play from
your smart device.
|NOTES |
✎ Press and hold the Bluetooth button on the
remote control to turn the Bluetooth Power
On function on or off.
Each time you press and hold this button,
the Hi-Fi Component displays BLUETOOTH
POWER ON ; BLUETOOTH POWER OFF on
its display.
Functions
18
English
02680D-MX-HS6000-ZA-ENG-20140304.indd 18 2014/3/17 15:47:44