Panning function, Non-stop music relay function, Dance time function – Samsung MX-HS7000-ZA User Manual
Page 27: Tempo function
03
Functions
+PANNING Function
Increases the left and right speaker's output
in turn and makes it seem as if the sound is
moving from side to side.
|NOTES |
✎
You can apply the PANNING effect to the
FLANGER, CHORUS, WAHWAH, TREMOLO,
FUZZ,PHASER, or SLAPBACK effect.
✎
To apply the PANNING effect to another
effect, press the +PANNING button when
the other effect is active or press another
effect button when the PANNING effect is
active.
NON-STOP MUSIC RELAY Function
The NON-STOP MUSIC RELAY function
plays music continuously without an interval
between tracks/files. If there were two mp3
files, it skips to the next file’s 10 seconds from
start position when the previous track reaches
its 10 seconds before end position.
Press the NON-STOP MUSIC RELAY button on
the product or NON-STOP RELAY button on
the remote control.
Each time you press this button, the mode
changes as follows:
NON-STOP MUSIC RELAY ON ; NON-STOP
MUSIC RELAY OFF
DANCE TIME Function
Press the DANCE TIME button on the remote
control when playing music to play the dance
music stored in the product.
Use this function to enjoy exciting music.
1. Press the DANCE TIME button on the
remote control or on the product.
Each time you press this button, the mode
changes as follows:
DANCE TIME ON ; DANCE TIME OFF
2. To cancel this function, press the DANCE
TIME button until "DANCE TIME OFF" is
displayed.
|NOTES |
✎
When the DANCE TIME sound file finishes
playing, the DANCE TIME mode changes to
DANCE TIME OFF.
✎
When DANCE TIME mode is switched ON,
the BT, TV SoundConnect, TUNER, and AUX
sources enter Mute mode.
✎
When playing a DANCE TIME sound file,
you can change the dance music by pressing
the SKIP button.
✎
If you set DANCE TIME to OFF during
playback of a CD or USB, playback of the
CD or USB starts again from the beginning
of the current track.
TEMPO Function
Use this to change the TEMPO (-10 ~ +10)
while music is playing.
1. During playback (CDDA/ MP3/ WMA),
press the TEMPO button on the remote
control or on the product.
2. Select the desired TEMPO by using the
EFFECT LEVEL button on the remote
control or DJ JOG button on the product.
• High speed search does not work on
TMEPO mode.
|NOTES |
✎
TEMPO Function does not operate in the
Bluetooth, TV SoundConnect, FM and AUX
mode.
✎
When you turn TEMPO off, all TEMPO
settings are lost.
27
English
02680D-MX-HS6000-ZA-ENG-20140304.indd 27
2014/3/17 15:47:50