Samsung PN50A650T1FXZA - Manual (Page 96)

English - 6
Network Test
You can test or confirm the network connection status after setting up the network.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select Wireless Network Setup, then press the ENTER
button.
3 Press the ▲ or ▼ button to select Network Test, then press the ENTER button.
The current network settings will appear.
If no
Access Point Select is set up, the test cannot be completed.
(See page 95)
Press the EXIT button to exit.
➣
➣
Network Test
MAC Address
IP Address, Subnet, Gateway, DNS Server
Gateway Ping
Domain Ping
Network Test Completed.
Your network is operating properly. If you still have a
network problem, contact your network service
provider.
Return
Setup
Network selection : Wireless
Cable Network Setup
WirelessNetworkSetup ►
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving : Off
PIP
SW Upgade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select : AP1
IP Address :
Subnet Mask :
Gateway :
DNS Server :
Enter Move Return
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
BN68-01532A-Eng.indb 96 2008-04-18 오후 8:39:12