Samsung PN50A650T1FXZA - Manual (Page 93)

English -
Network Test
You can test or confirm the network connection status after setting up the network.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select Cable Network Setup, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Network Test, then press the ENTER
button.
The current network settings will appear.
Press the EXIT button to exit.
➣
Setup
Time
Network selection
: Cable
CableNetworkSetup ►
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving : Off
PIP
Network Test
MAC Address
IP Address, Subnet, Gateway, DNS Server
Gateway Ping
Domain Ping
Network Test Completed.
Your network is operating properly. If you still have a
network problem, contact your network service
provider.
Return
Cable Network Setup
Internet Protocol Setup : Auto Setup
Network Test
IP Address :
Subnet Mask :
Gateway :
DNS Server :
Enter Move Return
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
BN68-01532A-Eng.indb 93 2008-04-18 오후 8:39:08