Samsung PN50A650T1FXZA - Manual (Page 92)

English -
Cable Network Setup
First, the Network selection must be set to Cable. (See page 91)
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.
Please check if the LAN cable is connected. (See page 89)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select Cable Network Setup, then press the ENTER
button.
3 Press the ENTER button to select Internet Protocol Setup.
4 Press the ▲ or ▼ button to select Auto Setup, then press the ENTER button.
The Internet Protocol is set automatically.
Select
Network Test to check the network connectivity.
(Refer to page 93)
Press the EXIT button to exit.
Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the Internet
Protocol (IP).
Please check if the LAN cable is connected. (See page 89)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
2 Press the ▲ or ▼ button to select Cable Network Setup, then press the ENTER
button.
3 Press the ENTER button to select Internet Protocol Setup.
4 Press the ▲ or ▼ button to select Manual Setup, then press the ENTER button.
5 Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric button to
configure the selected item. Press the ENTER button.
Select Network Test to check the network connectivity.
(Refer to page 93)
Press the EXIT button to exit.
➣
➣
➣
➣
➣
➣
Setup
Time
Network selection
: Cable
CableNetworkSetup ►
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving : Off
PIP
Setup
Time
Network selection
: Cable
CableNetworkSetup ►
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving : Off
PIP
Cable Network Setup
Internet Protocol Setup : Manual Setup
Network Test
IP Address : 0 0 0 0
Subnet Mask : 0 0 0 0
Gateway : 0 0 0 0
DNS Server : 0 0 0 0
Enter Return Move Number 0 ~
Cable Network Setup
Internet Protocol Setup : Auto Setup
Network Test
IP Address :
Subnet Mask :
Gateway :
DNS Server :
Enter Move Return
Auto Setup
Manual Setup
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
Cable Network Setup
Internet Protocol Setup : Auto Setup
Network Test
IP Address :
Subnet Mask :
Gateway :
DNS Server :
Enter Move Return
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
Auto Setup
Manual Setup
BN68-01532A-Eng.indb 92 2008-04-18 오후 8:39:08