Samsung EC-I85ZZBBA-AU - Manual (Page 88)

088
Playback ( Playback ( ))
 When this menu is selected without inserting a memory
card, the [No Card!] message will be displayed.
 If there is not enough space available in the memory card
to copy saved images in the internal memory (190MB), the
[Copy To Card] command will copy only some of the images
and display [Memory Full!] message. Then the system will
return to the Playback mode. Please be sure to delete any
unnecessary fi les to free up space before inserting the
memory card into the camera.
 When you move the images that are stored in the internal
memory by doing [Copy To Card] to the card, the next
number of fi le names will be created in the card to avoid
duplication of the fi le name.
– When the [Reset] of the [File] setup menu is set : The
copied fi le names start from after the last stored fi le
name.
– When the [Series] of the [File] setup menu is set : The
copied fi le names start from after the last captured fi le
name. After completing [Copy To Card], the last stored
image of the last copied folder is displayed on the LCD
monitor.
PictBridge PictBridge
You can use the USB cable to connect this camera to a printer that
supports PictBridge (sold separately) and print the stored images
directly. Movie clips and voice fi les cannot be printed.

Setting up the camera for connection to the printer
1. Connect the camera and printer with
USB cable.
2. Select the [Printer] menu by pressing
Up/Down button and press the OK
button.
■ Connecting the Camera to a Printer
Confirm OK
Select USB
Computer
Printer