Samsung SECR300ZRAMTR - Manual (Page 60)

60
– @metro
– MetroWeb
– VoiceSVC
– My Contents
– Tools
– Settings
• Check — Lets you say a single command (such as “Status”) to
verify your phone's: Status, Signal, Network, Battery, or My
phone #.
2. Speaking clearly, say the command that you want to
use.
If VoiceSignal does not recognize a command, it
prompts you to repeat the command.
If VoiceSignal still does not recognized the command, it
tells you “No match found” and offers you the option of
selecting Settings or Repeat before canceling voice
recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
Choice Lists
When VoiceSignal cannot recognize a name or number, it
displays a choice list of up to three possible choices, and
prompts you to confirm the correct one.
You can select how VoiceSignal will use choice lists with name
dialing, digit dialing, and contacts.
To change the way VoiceSignal uses choice lists:
1. In standby mode, press MENU ➔ Voice SVC ➔ Voice
Settings ➔ Choice Lists.
2. Highlight the Choice List behavior you prefer:
• Automatic — VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On — VoiceSignal always displays a choice list, even
when there is only one choice.
• Always Off — VoiceSignal never displays a choice list.
3. Press OK or to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.
Sensitivity
1. In standby mode, press MENU ➔ Voice SVC ➔ Voice
Settings ➔ Sensitivity.