Samsung SECR300ZRAMTR - Manual (Page 40)

40
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
1. Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry” on page 34) until you
enter a name for the entry.
2. After entering the Contacts entry name, do not press
. Instead, use the Up/Down Up/Down navigation
keys to highlight the number field.
3. Press Options. The following options appear in the
display:
• Set Speed Dial — Assign a speed dial number.
• Set as default — Set the number the phone will dial when
Contacts dialing, speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes
(see “Add Pauses to Contacts Numbers” on page 36 for
more information).
Use the Up/Down Up/Down navigation keys to highlight
Set Speed Dial, then press
. The Speed Dial screen
appears in the display.
4. Use the Up/Down Up/Down navigation keys to highlight
an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the Go To field using
the keypad.
Important!: Do not enter Speed Call numbers 1, 411, 611, or 911. These numbers
are already assigned to Voicemail (001), to Information (411), to
Customer Care (611), and to emergency use (911).
5. Press SET. You are prompted to confirm your Speed Dial
number assignment.
6. Press the Yes to save your Speed Dial assignment and
return to the Add New Entry screen.
Note: Press No to discard the assignment and return to the Speed Dial screen.
7. Press to save your changes.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. (For more
information, refer to “Finding a Contacts Entry” on page
33.)
2. Use the Up and Down navigation keys to highlight the
desired entry.
3. Press Edit. The Edit Contact screen appears in the
display.